74
The descriptions of every setting in this menu will be given below:
Item Description
Enable PPPoE Select ‘Enable’ to activate PPPoE function of this
IP camera, select ‘Disable’ to disable it.
User Name Input the PPPoE username assigned by your ISP
here.
Password Input the PPPoE password assigned by your ISP
here.
MTU Input the MTU (Maximum Transmission Unit)
given by your ISP here. Ask your ISP if you don’t
know what value you should input here, or use
default value.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort
and discard changes.
To Next Page
Loading...
