80
The descriptions of every setting in this menu will be given below:
Item Description
UPnP Select ‘Enable’ to activate UPnP (Universal
Plug-and-Play) function, so the IP camera can be located
by UPnP-compatible computers / devices. Select
‘Disable’ to disable it.
DDNS Select ‘Enable’ to activate Dynamic DNS function of this
IP camera, select ‘Disable’ to disable it.
Provider Select dynamic DNS service provider from drop down
menu here. Only dyndns.org is available currently.
Host Name Input dynamic DNS host name here.
User Name Input dynamic DNS user name here, must be the same
as the one you applied on dyndns.org.
Password Input dynamic DNS password here, must be the same as
the one you applied on dyndns.org.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort
and discard changes.
To Next Page
Loading...
