9. Service and spares
9.1 Introducon
Our products, spares and accessories are available from our companies in Belgium,
Brazil, China, France, Germany, Israel, Italy, Japan, Korea, Singapore, United Kingdom,
U.S.A and a world-wide network of distributors. The majority of these centres employ
service engineers who have undergone our comprehensive training courses.
Order spare parts and accessories from our nearest company or distributor. When
ordering, state for each part required:
▪
Model and Item Number of the equipment
▪
Serial number
▪
Item Number and descripon of part.
9.2 Service
Our products are supported by a world-wide network of our service centre. Each service
centre oers a wide range of opons including: equipment decontaminaon; service
exchange; repair; rebuild and tesng to factory specicaons. Equipment which has
been serviced, repaired or rebuilt is returned with a full warranty.
The local Service Centre can also provide our engineers to support on-site maintenance,
service or repair of the equipment.
For more informaon about service opons, contact the nearest service centre or other
company.
9.2.1 Return the equipment or components for service
Before you send your equipment to us for service or for any other reason, you must send
us a completed Declaraon of Contaminaon of Vacuum Equipment and Components –
Form HS2. The HS2 form tells us if any substances found in the equipment are
hazardous, which is important for the safety of our employees and all other people
involved in the service of your equipment. The hazard informaon also lets us select the
correct procedures to service your equipment.
We provide instrucons for compleng the form in the Declaraon of Contaminaon of
Vacuum equipment and Components – Procedure HS1.
If you are returning a vacuum pump, note the following:
▪
If a pump is congured to suit the applicaon, make a record of the conguraon
before returning the pump. All replacement pumps will be supplied with default
factory sengs.
▪
Do not return a pump with accessories ed. Remove all accessories and retain
them for future use.
▪
The instrucon in the returns procedure to drain all uids does not apply to the
lubricant in pump oil reservoirs.
03/2021 - ©Edwards Limited
Page 50A65201880_AA
A65201880_AA - Service and spares