EE Brightbox - APPENDIX A: DEFAULT ROUTER SETTINGS

EE Bright Box User Manual
204
APPENDIX A: DEFAULT ROUTER SETTINGS
The following table lists the default settings for the EE Bright Box wireless router. To restore
the router to default settings, see page 177
Section
Setting
Default Value
Router Admin Pages
URL
192.168.1.1
Username
admin
Password
Unique value - see sticker on bottom of
router or ‘’KEEP MEE’ card.
Broadband Settings
Broadband Type
ADSL (ADSL broadband) Fibre/Ethernet
(Fibre broadband)
Broadband
Username
readytoconnect@fs
Protocol
PPPoA (ADSL broadband) PPPoE (Fibre
broadband)
VPI/VCI
0/38
Encapsulation
VC MUX
Internet IP Address
Dynamic
DNS IP Address
Obtain from ISP
MTU
1492
Wireless Settings
Enable or Disable
Wireless
Enable
Wireless Mode
11b+11g+11n
Channel
Auto (Intelligent Wireless)
Wireless Network
Name (SSID)
Unique value - see sticker on bottom of
router or ‘KEEP MEE’ card.
Broadcast SSID
Enable
Security
WPA
WPA Mode
WPA/WPA2 Mixed Mode
Wireless Password
Unique value - see sticker on bottom of
router or ‘KEEP MEE’ card.
Wi-Fi Protected
Setup
Wi-Fi Protected
Setup (WPS)
Disable
USB File Sharing
Auto Share
Enable
Workgroup Name
Workgroup
File Permissions
Read & Write
Security Control
Disable
Advanced Broadband
Settings
Connection Type
Always Connected
Authentication
Protocol
CHAP
ADSL Mode
ADSL Mode
Automatic