EE Brightbox - Page 32

EE Bright Box User Manual
32
left-hand column navigation menu. An example below shows the navigation elements as they
appear in the basic set up > Wireless Settings page:
There are three main sections in the admin pages that are accessible by clicking on the
navigation tabs:
Section
Description
Status
This section consists of a single page that displays the
Bright Box status for Internet connectivity, wireless
connection status, currently connected device list (DHCP
table), USB device status and other LAN and WAN
settings.
Basic Set-Up
The section contains configuration pages for Broadband
Settings, Migration Wizard, Wireless Settings, Wi-Fi
Protected Setup (WPS) settings and USB File Sharing
configuration.
Advanced Set-Up
This section contains advanced configuration pages for
Broadband Settings, ADSL Mode, Migration Wizard,
Wireless Settings, wireless channel and SSID (including
multiple SSID and VLAN binding), WEP, WPA, 802.1x,
wireless Bandwidth Control, USB File Sharing, Mobile
Broadband, DHCP settings, NAT, Address Mapping, Port
Forwarding (also known as Port Mapping), Port Triggers,
NAT Mapping table, Firewall, Access Control,, MAC
Filtering, URL Blocking, Schedule Rules, Intrusion
Detection, DMZ, Quality of Service (QoS), Traffic Mapping,
DiffServ Groups, WMM, UPnP, Backup and Restore
Configuration, Restart Router, Factory Default, Firmware
Upgrade, System Settings, Time Settings, Password
Settings, DDNS, ADSL Status and System Log.