Eircom Advantage - Making an External Call Using Off-Hook Dialling; Making an External Call Using On-Hook Dialling; Making an External Call Using a Trunk Line Key

eircom advantage IP Professional phone user guide
11
2.6 Making an external call using Off-hook dialling
1 1 : 2 5 S a t 0 7 / 1 2 / 0 2
E x t e n s i o n 1 5
M e n u s


 


P h o n e B k
I n t e r n a l d i a l l i n g
O p t i o n s 

 

 C a n c e l
E x t e r n a l d i a l l i n g
8 1 6 6 9
O p t i o n s 

 

 C a n c e l
Note: If the direct trunk line seize feature is enabled, the user will hear external dial tone and the
display will indicate external dialling as soon as the User goes off-hook.
2.7 Making an external call using On-hook dialling
1 1 : 2 5 S a t 0 7 / 1 2 / 0 2
E x t e n s i o n 1 5
e n u s 

 

 P h o n e B k
1 1 : 2 5 S a t 0 7 / 1 2 / 0 2
E x t e n s i o n 1 5
0 7 2 4 0 3 0 5 1 1
D e l e t e 

 

 D i a l
2.8 Making an external call using a Trunk line key
Pressing the L1 or L2 key will automatically seize the trunk line and switch on the hands free
facility (you can switch off hands free mode by lifting the handset). The required number can be
dialled and the display will show the status of the call. The call can be ended at any time by
replacing the handset, pressing the ON HOOK
key or <Endcall> key.
With the telephone idle, lift the handset or
press the SPEAKER
key.
Internal dial tone will be heard and the
display will show Internal Dialling.
• Dial the line access digit, the line
access group or select a trunk line
using the pre-programmed keys. The
top line of the display will then show
External Dialling.
• Dial the number – the digits will
appear on the display as they are
dialled. The user can cancel the
external call and return to internal
dialling by pressing <Cancel>.
With the telephone idle, to make an
external call simply dial the line
access digit or the line access group
followed by the external number from
the keypad.
The number dialled will be shown on
the third line of the display. The user
can delete the last digit by pressing
the left mouse key <Delete>.
To initiate the call either press <Dial>, pick up the handset or press the SPEAKER
key.
The call can be ended at any time by:
• Pressing the <Endcall> key
• Replacing the handset
• Pressing the OH HOOK
key.