eircom advantage IP Professional phone user guide
9
2.4 Making an internal call using On-hook dialling
1 1 : 2 5 S a t 0 7 / 1 2 / 0 2
E x t e n s i o n 1 5
M e n u s
P h o n e B k
1 1 : 2 5 S a t 0 7 / 1 2 / 0 2
E x t e n s i o n 1 5
1 8
D e l e t e
D i a l
E x t n 1 8
R i n g i n g
O p t i o n s
C a n c e l
E x t n 1 8
0 0 : 0 1 : 1 9
O p t i o n s
E n d c a l l
With the telephone idle, to make an
internal call simply dial the User/group
number from the keypad.
The number dialled will be shown on the
third line of the display. The user can
delete the last digit by pressing the left
mouse key <Delete>. To initiate the call
press Dial or pick up the handset or
press the SPEAKER
key.
The display shows the name/number of the
User/group being called and the status of
the call, i.e. Ringing. This will change
briefly to Connected when the called party
answers, after which a call timer will be
shown.
The call can be ended at any time by:
• Pressing the <Endcall> key
• Pressing the ON HOOK
key
Note: If the direct trunk seize feature is enabled for the User, then the system will attempt to
make an external call as soon as the user initiates the call.
To Next Page
Loading...
