Eircom Advantage - Conference Calls

eircom advantage IP Professional phone user guide
19
2.26 Conference Calls
A conference is a call in which there are three parties connected together at the same time.
A eircom advantage IP Professional phone can hold a conference with the following:
- Two internal Users
- Two external lines
- One internal User and one external line.
E x t n 1 2
0 0 : 3 3
O p t i o n s 

 

 E n d c a l l
I n t e r n a l D i a l l i n g
_
E x t n 1 2 O n H o l d
O p t i o n s 

 

 C a n c e l
E x t n 1 3
0 0 : 1 5
E x t n 1 2 O n H o l d
O p t i o n s
↑
↑↑
↑ ↓
↓↓
↓
E n d C a l l
E x t n 1 3 C o n f e r
E x t n 1 2 C o n f e r
O p t i o n s
↑
↑↑
↑ ↓
↓↓
↓
U n C o n f e r
2.27 End a conference call
E x t n 1 3 C o n f e r
E x t n 1 2 C o n f e r
O p t i o n s
↑
↑↑
↑ ↓
↓↓
↓
U n C o n f e r
To initiate a conference call while on an
external or internal call -
• Place the call on hold by pressing the
HOLD key
• Dial the number to initiate the second
call, e.g. internal User 13
• When connected to the second party,
press the <Options>key
• Use the 



 keys to scroll and select
the Conference option
• All parties are now in conference.
The top 2 lines will show the other 2
parties in the conference.
There are different ways to terminate the conference call –
• If either of the other two parties involved in the conference call clears down, the conferencing
User will revert to a two-party call with the remaining party
• By replacing the handset, the second party will be cleared, the conferencing User will ring and
when answered, a two-party call will be established with the first party
• Pressing the <UnConfer> key will put the first call in hold and establish a two-party call with the
second User
Pressing the <Options> key displays the
following
− End Conference Call (See pressing the
<UnConfer> key above)
− End Current Call which ends both calls