Eircom Advantage - Dialling Code Table

eircom advantage IP Professional phone user guide
41
2.64 Dialling Code Table
FEATURES CODES
To Call a User (User No.)
To Access any Trunk 9
To Access a particular Trunk *91 to *95
Last Number Redial *5
Dial entries in Common Address Book *4000 to *4199
Dial entries in Personal Address Book *800 to *849
Park a Call (Recall) *74
Retrieve Parked Call from an User *75 (User No.)
Retrieve Parked Trunk Call *9* (Trunk No.)
Retrieve Parked User *9# (User No.)
Universal Pick-up *710
Directed Pick-up *71 (User No.)
Directed Pick-off *71 (User No.)
Call Transfer Explicit (at dial tone with two calls on hold) *72
Conference (at dial tone with two calls on hold) *73
Directed Page *77 (User No.)
Page PA Port *77#
Universal Page (all Users and PA Port) *77*
Answering a Universal Page *76*
Answer a Page from an User *76 (User No.)
To call a User Group 80 – 89
Door Opening Code *78
To access Voice Mail *99
Break-out of Voice Mail (while listening to voice mail
greeting)
* (User No.)
Remotely accessing your Voicemail (while listening to voice
mail greeting.)
#PIN
Transfer call to Mailbox (While ringing the User) #99
Call-Back (at busy tone) 5
Intrude (at busy tone) 79
USER PROGRAMMING OPTIONS CODES
Forward All Calls to a User *21* (User No.) #
Forward All Calls to Voice Mail *21* *99 #
Forward All Calls to an External number *210* (Tel No.) #
Clear Forward All #21#
Forward on No Answer to a User *61* (User No.) #
Forward on No Answer to Voice Mail *61* *99 #
Forward on No Answer to an External number *610* (Tel No.) #
Forward on No Answer to an User after S seconds *61* (User No.) *S #
Forward on No Answer to Voice Mail after S seconds *61* *99 *S #
Forward on No Answer to an External number after S secs. *61* (Tel No.) *S #
Clear Forward on No Answer #61#
Forward on Busy to a User *67* (User No.) #
Forward on Busy to Voice Mail *67* *99 #
Clear Forward on Busy #67#
Do Not Disturb *62#
Clear Do Not Disturb #62#
Program entries in Your Personal Address Book **8 (Index Code 00-49) * (Tel No.) #
Manual Day/Night Switch *07* (Ringing Mode 1-5) #
Change User PIN code *70*UserPIN * NEWUserPIN * NEWUserPIN#
Clear Uesr PIN code *70* PIN #
Program User PIN Code (if you have no User PIN code) *70** NEWUSERPIN * NEWUSERPIN #
Activate Roaming PIN *68 (Roaming Account) (Roaming PIN) #
Deactivate Roaming PIN #68#
Restrict CLI for all calls *30#
Select an external Trunk and Restrict CLI for this call only *0*30#
Present CLI for all calls *31#
Select an external Trunk and Present CLI for this call only *0 *31#