eircom advantage IP Professional phone user guide
17
2.22 Call Park timeout
Call Park Time-out: To prevent calls being abandoned or lost in the PARK state, there is a
programmable timer that sets the maximum time a call can be parked on the system. By default this is
set at 180 seconds.
E x t n 1 6
R e t u r n i n g F r o m P a r k
O p t i o n s
↑
↑↑
↑ ↓
↓↓
↓
A n s w e r
2.23 Paging
1 1 : 2 5 F r i 0 7 / 1 2 / 0 2
E X t e n s i o n 1 5
M e n u s
P h o n e B k
1 1 : 2 5 F r i 0 7 / 1 2 / 0 2
E x t e n s i o n 1 5
M e n u s
P a g i n g
► A l l D e v i c e s
P A P o r t
S y s t e m P h o n e s
S e l e c t
E x i t
►
A l l S y s t e m P h o n e s
E x t n 1 1
E x t n 1 2
S e l e c t
↑
↑↑
↑ ↓
↓↓
↓
E x i t
L i f t H a n d s e t
E x i t
A l l D e v i c e s
B e i n g P a g e d
O p t i o n s
E n d c a l l
Note: If the eircom advantage IP Professional phone has a PAGE key programmed, pressing this key
once will take the display directly to the paging options screen.
Pressing the PAGE key twice in quick succession also enables/disables the Receive Page Calls
feature. The LED on the PAGE key will indicate whether this feature is enabled or not.
- LED ON: The phone will not receive page calls
- LED OFF: The phone can be paged by other Users
To broadcast a page -
• Press the
key twice. The right key will
change from <Phone Bk> to <Paging>
• Press the <Paging> key
The three paging options are displayed.
• Use the
keys to scroll to the required
option
• Press the <Select> key
If All Devices or a PA Port is selected, the
display opposite will not appear.
If page System Phones is selected, there is an
option to page all System Phones or just a
specific User.
• Choose an option and press the
<Select> key
• Lift the handset
• Make the announcement
To end the page -
• Replace the handset
• The System Phone returns to idle
If the Call Park Timer expires before the call
is retrieved, the parked call will ring back the
User that parked it.
• Press the <Answer> key or lift the
handset to answer the call
To Next Page
Loading...
