Eircom Advantage - Change User PIN Code

eircom advantage IP Professional phone user guide
50
3.15 Change User PIN Code
E n t e r O l d P i n C o d e :
* * * *
A c c e p t D e l e t e
E n t e r N e w P i n C o d e :
* * * *
A c c e p t D e l e t e
V e r i f y N e w P i n C o d e :
* * * *
A c c e p t D e l e t e
P i n C o d e C h a n g e d
B a c k
I n v a l i d P i n C o d e
B a c k
E r r o r C h a n g i n g P i n
B a c k
Note: When remotely accessing voicemail (See Voicemail user guide), only certain 4 digit User PIN
codes are accepted by the system. The codes that will not be accepted by the system for remote access
are the following:
• Any User PIN code starting with the digits 19 or 20 (e.g. 1945, 2004, ..)
• Any User PIN code that is a consecutive 4 digit number ( e.g. 1234, 9123,.. )
• Any User PIN code that consists of the same 4 digits ( e.g. 1111, 4444 )
User PIN codes are used when accessing
voicemail boxes
. To change the User PIN code
• Select Change User Pin Code from the
Phone Settings menu
• Enter the four digits of the old PIN code.
Errors can be corrected using the
<Delete> key
• Press the <Accept> key when finished
• Enter a new 4 digit PIN code
• Errors can be corrected using the
<Delete> key
To save the new code -
• Press the <Accept> key
To verify the New Pin Code -
• Enter the new 4 digit PIN
To save the new PIN code -
• Press the <Accept> key
If the User PIN code was entered correctly, the
display will show that the User PIN code has
been changed.
If the old password was incorrect, the display
will show that the PIN code is invalid.
If the new PIN code and the verification PIN
code were different the screen will show that
an error has been made.