Eircom Advantage - Program the Advanced Options for a Personal Address Book Entry

eircom advantage IP Professional phone user guide
34
2.55 Program the advanced options for a Personal address book entry
Usually, it is only necessary to program the number and name for the Phonebook entry but the system
also allows the user to select the following parameters:
− The line group that the system will access when dialling the number (External Option)
− To enable or disable the system to send the CLI (Call line Identification) information to line when
making the call (CLI Option)
− To store the number under a function key, allowing one touch dialling from that key
(Function Option)
E n t e r N a m e
M i k e M u r p h y
N e x t 

 

 D e l e t e
D o Y o u W i s h T o
C h a n g e t h e A d v a n c e d
O p t i o n s ?
N o Y e s
►
E x t e r n a l : 9
C L I : P r e s e n t e d
F u n c t i o n K e y : N o n e
S e l e c t 

 

 B a c k
O f f
►
9
√
√√
√
* 9 1
S e l e c t 

 

 B a c k
2. CLI Option: Selects whether or not the Calling Line Identification is sent to line.
►
P r e s e n t e d
√
√√
√
R e s t r i c t e d
S e l e c t 

 

 B a c k
By default, the CLI option is set to Presented.
To program the advanced options for a personal
address book entry;
• Enter the personal address book and
enter the Number and Name for a new
entry as previously described
• Press the <Next> Key
• The display will ask the user if they wish
to change the advanced options
• Press the <Yes> key
There are three settings available to the user to
program
- 1. External
- 2. CLI
- 3. Function Key
1. External Option: Selects the line group that the system will try to access when dialling the entry.
The following options are presented:
• “Off” (The system will not attempt to seize
a line for the entry)
• Set Line Access Groups (*91-*98)
• “9” (Seize Any available line)
• Use the 



 keys to move to the required
setting and press the <Select> key.
• To return to the previous screen press the
<Back> key
By default, the external option is enabled ( 9 is ticked).
The following options are presented:
• Restricted: The CLI is not sent out to
called parties.
• Presented: The CLI is sent out to called
parties.
• Use the 



 keys to move to the
required option and press the <Select>
key
• To return to the previous screen press
the <Back> key