Eizo ColorEdge CX271 - Changing DUE (Digital Uniformity Equalizer) Setting

31
Chapter3SettingMonitor
3-5. Changing DUE (Digital Uniformity Equalizer)
Setting
The DUE setting can be changed.
Settings Function
Brightness Makesthebrightnessandcolorofthewholescreenuniformwithoutchangingthemaximum
brightnessandcontrastratio.Thebrightnessofahighgradationareaisnotcorrected.Select
thissettingtoprioritizethelevelsofthebrightnessandcontrastovertheuniformityinthehigh
gradationarea.
Uniformity Makesthebrightnessandcolorofthewholescreenuniform.Thebrightnessofahighgraduation
areaisalsocorrectedsoitisuniform.Selectthissettingtoprioritizetheuniformityoverthelevels
ofthebrightnessandcontrastinthehighgradationarea.
Attention
• To change the DUE setting, the adjusted monitor display must be readjusted. Perform the target adjustment again using
ColorNavigator or ColorNavigator Elements. For details, refer to the ColorNavigator or ColorNavigator Elements User’s
Manual (on the CD-ROM).
Procedure
1. Press
to turn off the monitor.
2. Holding
down, press for at least two seconds to turn on the monitor.
The “Optional Settings” menu appears.
3. Choose “DUE Priority” from “Optional Settings”, and press .
4. Select “Uniformity” or “Brightness” with
or , and press .
5. Select “Finish” with
or .
6. Press
.