Eizo ColorEdge CX271 - 7-3. Other Problems

43
Chapter7Troubleshooting
7-3. Other problems
Problem Possible cause and remedy
1. The adjustment menu does not appear. • Checkwhethertheoperationlockfunctionworks(see“3-4.
LockingOperationButtons”(page30)).
• OperationbuttonsarelockedwhenColorNavigatoror
ColorNavigatorElementsisrunning.Exitthesoftware.
2. No mode menu is displayed. • Checkwhethertheoperationlockfunctionworks(see“3-4.
LockingOperationButtons”(page30)).
• OperationbuttonsarelockedwhenColorNavigatoror
ColorNavigatorElementsisrunning.Exitthesoftware.
3. The monitor connected with the USB cable
is not detected. / USB devices connected
to the monitor does not work.
• CheckwhethertheUSBcableisconnectedcorrectly(see
“8-2.MakingUseofUSB(UniversalSerialBus)”(page46)).
• Checkthe“USBSelection”settingsundertheSetting
menu(see“5-4.SwitchingUSBPortAutomatically”(page
37)).
• ChangetheUSBporttoanotherone.IfthePCor
peripheraldevicesworkscorrectlybychangingtheUSB
port,contactyourlocalEIZOrepresentative.(Refertothe
manualofthePCfordetails.)
• RebootthePC.
• IftheperipheraldevicesworkcorrectlywhenthePCand
peripheraldevicesareconnecteddirectly,pleasecontact
yourlocalEIZOrepresentative.
• CheckwhetherthePCandOSareUSBcompliant.(For
USBcomplianceoftherespectivedevices,consulttheir
manufacturers.)
• CheckthePC’sBIOSsettingforUSBwhenusing
Windows.(RefertothemanualofthePCfordetails.)
4. Audio is not output. • ThismonitordoesnotsupporttheHDMI/DisplayPort
audiosignals.