Eizo ColorEdge CX271 - Page 8

8
Chapter1Introduction
Attention
Be careful of the following points when using the built-in correction sensor.
Do not touch the built-in correction sensor.
Itmayreducethemeasurementaccuracyofthebuilt-incorrectionsensor,orresultininjury
orequipmentdamage.
Attention
• A high temperature or high humidity environment may affect the measurement accuracy of the built-in correction
sensor. We suggest storing and using the monitor under the following conditions.
- Temperature 30˚C or less
- Humidity 70% or less
Avoid storing or using the sensor where it may be exposed to direct sunlight.
Note
• This monitor supports both portrait and landscape format. You can change the orientation of the Setting menu when
using the monitor screen in vertical display position. (see “Setting Orientation” (page 29))
• When using the monitor screen in a portrait position, the graphics board supporting portrait display is required. When
placing the monitor in a portrait position, the settings of your graphics board need to be changed. Refer to the User’s
Manual of the graphics board for details.