ELAN HOME SYSTEMS D16 INSTALLATION MANUAL
© ELAN Home Systems 2010 | All rights reserved.
Page 7
D16 Features
• Class D Digital Technology
Provides clean, transparent audio amplification while greatly reducing power
consumption
• 50 Watts Per Channel
Easily produces 50W/Ch into an 8 ohm load and 75W/Ch into 4 ohm loads
• Automatic Clipping Eliminator (ACE)
This D16 limiter constantly monitors the amplified output to prevent signal
clipping
• Automatic Volume Reduction (AVR)
This D16 limiter constantly monitors the overall output to prevent over-driving the
amplifier
• Intelligent Load Monitoring
The D16 automatically detects load faults and shuts down only the affected
channels, thereby protecting speakers, wiring and the amplifier itself
• Multiple Bus Inputs
The D16 can utilize up to 8 stereo bus inputs to allow sharing a single audio
source between multiple speaker outputs (no jumper wires required)
• Buffered Loop Outputs
Every input channel has a buffered loop output that allows the user to easily share
audio sources with other equipment
• IR / VIA!NET Controllable
Each channel can be independently controlled via IR or VIA!NET commands
• USB Port
Allows easy in-field firmware updates
• Rack Mount Brackets Included
No need to worry about field compatibility
• Available in 240 Volt Version
• cTUVus, CE
®
, and C-Tick Certified
To Next Page
