Electro-Craft BRU-200 - Section 11- Specifications; Drive MCX:lule Specifications

4
Specifications
SECTION II - SPECIFICATIONS
2.1 Drive Module Specifications
BRU-500 Model
Continuous
Amps[1]
Peak Amps[1
I
Bus Voltage
Command Signal
Input Range
Ambient Temp.
Weight
BRU-200 Model
Continuous
Amps [1]
Peak Amps
[1 1
Input Volts
Internal DC
Bus Voltage
Command Signal
Input Range
Continuous
Shunt Power
[21
Peak Shunt Power
[21
Ambient Temp .
We ight
DM-25
20
25
DM-50 DM-100
40 50
50 100
125-375 VDC
(325 VDC with 230 VAC input)
± 10 VDC (13.3k Ohms impedance)
32o-122oF (0°-50°
C)
24.2 lbs (11 .0 kg)
DM-20
10
DM-30
15
10 20
100-240 VAC RMS (Single Phase)
141-340 VDC
(325 VDC with 230 VAC Input)
± 10 VDC (13.3k Ohms impedance)
sow
4. 5kW
32°-122oF (0 °-50° C)
15 lbs (6.8 kg)
30
peak value
of sine wave per phase
DM-150 DM-150X
65 85
150 150
[1 1
[2 ]
DM-30 has provision
for optional external shunt resistor that provides 200 W continuous and
6000 W peak shunt power. See drawing 9101-1328 in Section X
for additional details.
BRU-200/BRU-500 Brushless Drives Instruction Manual
(