The appliance does not turn on or does not heat up
Possible cause
Remedy
The clock is not set. Set the clock, for details refer to Clock func‐
tions chapter, How to set: Clock functions.
The door is not closed correctly. Fully close the door.
The fuse is blown. Make sure the fuse is the cause of the prob‐
lem. If the problem recurs, contact a qualified
electrician.
The appliance Child Lock is on. Refer to "Menu" chapter, Submenu for: Op‐
tions.
Components
Description
Remedy
The lamp is burnt out. Replace the lamp, for details refer to "Care and
Cleaning" chapter, How to replace: Lamp.
Power cut always stops cleaning. Repeat cleaning if it's interrupted by power failure.
12.2 How to manage: Error codes
When the software error occurs, the display shows error message.
In this section, you will find the list of the problems that you can handle on your own.
Code and description Remedy
F111 - Food sensor is not correctly inserted in‐
to the socket.
Fully plug Food sensor into the socket.
F240, F439 - the touch fields on the display do
not work properly.
Clean the surface of the display. Make sure
there is no dirt on the touch fields.
F908 - the appliance system cannot connect
with the control panel.
Turn the appliance off and on.
225/1040
TROUBLESHOOTING
To Next Page
Loading...
Need help?
General
