Z3 Styling
It can be combined with buttons with 3 LEDs. The combination is the same as that described for the previous
version.
The following tables contain the possible configurations of the “Spin” button depending on the combination of
LEDs:
button with 3 LEDs and “Rinse hold” option combined with this button
No spin
or
No spin
or
No spin
or
No spin
or
Button with 3 LEDs and “Rinse hold” option not combined with this button
When a programme is selected, the LED corresponding to the configured spin speed comes on.
If the “Rinse hold” option is combined with another button and it is selected, all the LEDs will be turned off.
Technical Support - DMM 56/124 599 75 58-67 Rev.04