Service
Manual
33
23
23. Programme unit
438 9145-41/03
03.11
1 2 3
4 5 6
7 8 9
0
Water level for quick cool-down
Here you determine the level to which the machine
fills with cold water for quick cool-down.
When you are creating a wash program, in the
module ”COOL-DOWN” there is an option for
programming ”QUICK COOL-DOWN”.
Quick cool-down means that the machine will fill with
cold water to a higher level.
This function is used mainly for reducing the
temperature of the water before it is discharged.
For information on the levels used for the various
machines, see the manual ”Programming, PCS
Program Control Unit”.
Water level
Level, quick cool-down
The machine fills
with cold water
Time
Water level during wash
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
TEMPERATURE CONTROL OF WATER Y
TEMPERATURE IN °CY
REPEAT PROGR. MODE QUESTION N
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL- DOWN 175
LEVEL UNBALANCE 0
LEVEL LOW 135
LEVEL MEDIUM 150
LEVEL HIGH 175
MIDDLE TEMPERATURE COOL-DOWN 70 °C
DEFAULT MOTOR ON TIME 0:12
DEFAULT MOTOR OFF TIME 0:03
FLUSH DELAY TIME 0:06
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .
No access to standard programs
Here you determine whether the user will have
access to the machine’s standard programs
(numbered 991-999) or not.
If you answer Yes (Y):
The user will not have access to the standard
programs.
If you answer No (N):
The user will have access to the standard
programs.
DISPLAY ACTUAL TEMPERATURE Y
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
TEMPERATURE CONTROL OF WATER Y
TEMPERATURE IN °CY
REPEAT PROGR. MODE QUESTION N
LOCKED STANDARD WASH PROGRAMS N
LEVEL QUICK COOL-DOWN 175
LEVEL UNBALANCE 0
LEVEL LOW 135
LEVEL MEDIUM 150
LEVEL HIGH 175
MIDDLE TEMPERATURE COOL-DOWN 70 °C
DEFAULT MOTOR ON TIME 0:12
DEFAULT MOTOR OFF TIME 0:03
Y/N
Answer Yes (Y) or No (N).
Press .
To Next Page
Loading...
Need help?
General
