Service
Manual
23
23. Programme unit
40
438 9145-41/03
03.11
BUZZER TIMEOUT AT END 0:20
1 2 3
4 5 6
7 8 9
0
Buzzer length at programme end
Here you determine for how long the buzzer
should sound at the end of the programme unless
it is not turned off manually.
When programming the main data for a washing
programme, it is possible to select whether or not
to sound the buzzer at the programme end. The
buzzer is switched off by pressing a function
button on the control panel.
BUZZER TIMEOUT AT PAUS 0:10
1 2 3
4 5 6
7 8 9
0
Buzzer length at pause
Here you determine for how long the buzzer should
sound at a programmed pause unless it is not
turned off manually.
When programming a washing programme, it is
possible to select whether or not to pause and
sound the buzzer for each washing module before
that module starts. The buzzer is switched off by
pressing a function button on the control panel.
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .