Service
Manual
55
23
23. Programme unit
438 9145-41/03
03.11
DO UNBALANCE MEASUREMENT Y
DRAIN OPEN DELAY 0:13
START EXTRACT TIME 00:30
ROLLOUT TIME 00:01
PAY PER WASH ALARM 0
LOCK TEST DELAY 0:10
DRAIN TIME WHEN OVERFILL 0:05
OIL LUBRICATION HOURS 100
PULSE TIME OIL LUBR. SEC 0:01
AMOUNT OF I/O MODULES (1-3) 3
DELAY CLEAR DOOR TEXT 04:00
MAX DRAIN TIME 4:00
1 2 3
4 5 6
7 8 9
0
Lock test delay
Here you determine the length of time between
when the door is locked and when the check
should be made of the lock’s microswitch.
When the machine commands that the door be
locked, the door lock is activated. The lock
actuates a microswitch which signals whether or
not the door is really locked.
Note that the machine always begins its wash
sequence immediately after the door has been
locked, and that the time you program here will
not affect that. If, when this check is made, the
microswitch should signal that the door is not
locked, the machine will stop and the error
message DOOR UNLOCKED will be displayed.
Use the numeric keys to
enter the value.
If you make a mistake while
entering digits:
Press ERASE.
When you have finished:
Press .
To Next Page
Loading...
Need help?
General
