What causes the pressure sensor on the Electrolux Dishwasher air gap to fail?
If the pressure sensor on the air gap of your Electrolux Dishwasher isn't working correctly, it could be due to a few reasons. The pressure sensor itself may be faulty and need checking or replacement. Also, ensure the pressure sensor connector on the air gap and the X7 connector on the rinse board are correctly inserted.
How to fix an open or disconnected Electrolux Dishwasher wash tank temperature sensor?
If the wash tank temperature sensor in your Electrolux Dishwasher is open or disconnected, make sure the wash tank temperature sensor connector and the connector on the wash board are correctly inserted.
Provides access to machine values not visible to the user.
Explains how to navigate between user and service menus.
Allows setting of date/time and viewing consumption data.
Enables access to parameters, datalog, and machine information.
Covers settings for units, language, and motor current.
Illustrates connector positions on power boards.
Shows connector layouts for multiconnector boards.
Provides a legend for connector types and functions.
Details connections for limit, energy peak, and emergency switches.
Details programming for Altivar 11 inverter machines.
Details programming for Altivar 12 inverter machines.
General| Appliance Category | Dishwasher |
|---|---|
| Type | Freestanding |
| Place Settings | 14 |
| Half Load Option | Yes |
| Size | Full-size |
| Delay Start | Yes |
| Dimensions (H x W x D) | 850 x 600 x 625 mm |
To Next Page
