Elkron MP110 - LCD display keypad description

(((ELKRON))) - MP110
2.7.2 LCD display keypad description
Indicates the presence of the mains
voltage and the level of battery charge:
OFF = 220V~ mains absent
FIXED LIGHT = 220V~ Mains present
FLASHING = Low battery charge
These display the status of the three areas
into which the alarm system is divided:
ON = armed zone
OFF = disarmed zone
These Leds flash to indicate the
presence of events to be displayed.
Keys used to arm/disarm the system
These are also used to scroll the
programming menu.
Keys used to type in the secret code and
to select certain functions on the alarm
unit programming menus.
A flashing light indicates that alarms have occurred
A flashing light indicates that burglaries have occurred on one or more
parts of the system.
A flashing light indicates that there are protected zones (doors or
windows protected by contacts) that are still open.
A flashing light indicates that some sensors/contacts are disabled.
TOTAL
TEST
ZONE
TEL
EXIT
SIREN
1
2
3
A
1
2
4
5
7
3
6
9
F
0
8
C
S
O
E
**
3
2
1 3
KP100D
+
-
18