(((ELKRON))) - MP110
system standby for entry of the key to be checked.
4. After entering the key to be checked, if its code corresponds to the
stored code, leds 1, 3 and 4 of all the devices will indicate the controlled
zones. The number of the entered key appears on the segmented
displays, while the alphanumeric display indicates the message “KEY
NUMBER nn”, where “nn” corresponds to the number of the key that is
read.
If the key code entred does not correspond to the stored code, all
zone leds will flash quickly and the message “UNKNOWN KEY” appears
on the alphanumeric displays. Flashing will continue until the key is
removed.
Press F to exit
38
To Next Page
Loading...
