Elkron MP110 - System events

(((ELKRON))) - MP110
5.13.2.c System events
Even LCD Display LED Display
Arming/disarming:
user code - - - ON/OFF - - -u nn
key code - - - ON/OFF - - -k nn
mechanical key code - - - ON/OFF - - -m k
Remote arming ON FROM REMOTE
Telemanagement start START TELEG. u nn
Telemanagement end END TELEG. u nn
Test entrance START TEST u nn
Uscita dal test END TEST u nn
NOTE: the event log will include all the inputs tested during the system test phase. The visualized access codes
correspond to:
u nn= user code (nn: 01-08)
k nn= key code (nn= 01-51)
m k = mechanical key input
sys= operation made by the system (e.g. open zone self-bypassing)
60