Elkron MP110 - Failure alarm events

(((ELKRON))) - MP110
5.13.2.d Failure alarm events
Event LCD Display LED Display
No power -control unit inputs NO PWR ZONE CEN.
No power- control unit outputs NO PWR OUTPUTS
No power-serial peripherals NO PWR SERIAL
Battery low LOW BATTERY
OK battery OK BATTERY
No mains in control unit NO MAIN C.PANEL
Mains return to control unit OK MAIN
No mains –expansion 1 NO MAIN EXPANS. 1
No mains –expansion 2 NO MAIN EXPANS. 2
No mains –expansion 3 NO MAIN EXPANS. 3
No mains –expansion 4 NO MAIN EXPANS. 4
Mains return –expansion 1 OK MAIN
Mains return –expansion 2 OK MAIN
Mains return –expansion 3 OK MAIN
Mains return –expansion 4 OK MAIN
Power fail-control unit sensors C.U. PWR SUPPLY
Power fail –expansion 1 PWR SUPPLY EXP. 1
Power fail –expansion 2 PWR SUPPLY EXP. 2
Power fail –expansion 3 PWR SUPPLY EXP. 3
Power fail –expansion 4 PWR SUPPLY EXP. 4
Fuse fail-expansion 1 FUSE EXPANSION 1
Fuse fail-expansion 2 FUSE EXPANSION 2
Fuse fail-expansion 3 FUSE EXPANSION 3
Fuse fail-expansion 4 FUSE EXPANSION 4
Fail input-expansion 1 FAILURE ZONE 1A
Fail input-expansion 2 FAILURE ZONE 2A
Fail input-expansion 3 FAILURE ZONE 3A
Fail input-expansion 4 FAILURE ZONE 4A
Telephone line failure TEL. LINE TAMPER
NOTE: For LED keypads the failure element cannot be discriminated
= Fuse Fail = Mains return = Telephone line
= Power Fail = Battery low
= No mains = OK battery
61