Elna International Corps. SA 3210 / 3230 Service manual
Auto-Stop Buttonhole (Model 3230)
The machine will stop automatically when buttonhole is completed.
If the machine stops too early or too late, correct it as follows:
Adjustment procedure:
1. Remove the face cover (See page 4.).
2. Loosen the setscrew (A).
3. If the machine stops too early: Move the adjusting plate in the direction of (B).
4. If the machine stops too late or does not stop: Move the adjusting plate in the direction of (C).
5. Tighten the adjusting screw (A).
6. Attach the face cover.
Page 24
To Next Page
Loading...
