ELNEC s. r. o.
check the timing and communication between programmer and
PC.
An optimally designed printed circuit minimizes negative
programming effects at the socket (such as ground bouncing,
supply voltage instability). All the inputs of the JetProg
programmer, including the ZIF socket, connection to PC and
power supply input, are protected against ESD to protect the
programmer and programmed circuits against damage due
ESD.
JetProg performs programming verification at the marginal
level of supply voltage, which, obviously, improves
programming yield, and guarantees long data retention.
JetProg programmer is driven by an easy-to-use control
program with pull-down menu, hot keys and on-line help.
Selecting of device is performed by its class, by manufacturer
or simply by typing a fragment of vendor name and/or part
number.
Standard device-related commands (read, blank check,
program, verify, erase) are boosted by some test functions
(insertion test, signature-byte check), and some special
functions (autoincrement, production mode - start immediately
after insertion of chip into socket).
All known data formats are supported. Automatic file format
detection and conversion during load of file.
The rich-featured autoincrement function enables to assign
individual serial numbers to each programmed device - or
simply increments a serial number, or the function enables to
read serial numbers or any programmed device identification
signatures from a file.
Various socket converters are available for the JetProg, DIL
to PLCC, DIL to PSOP, DIL to SOIC, DIL to TQFP and DIL to
TSOP. Software controlled pin-swapping capability together
with universal converters are what give the JetProg the ability
to program the target device in any package type. For
example, just one DIL44 to PLCC44 converter will allow the
JetProg to handle any PLCC44 target device in the current
device list.
Devices with more than 48 pins are supported by
• pindriver expansion module and universal single socket
module
• simple special package converters
It is important to remember that in most cases new devices
require only a software upgrade since the JetProg has 48
18
To Next Page
Loading...