48
Fig. 26: Program selection list display (QuickModeASC)
1. ASC mode is called up using the special program in the program list.
All programs with a single step can be selected (see Fig. 25a). –
Once the first single-step program has been selected, all other program –
suggestions which can be baked simultaneously with almost identical
program settings, are displayed (see Fig. 25b).
2. Select three baking programs for the insert levels.
Fig. 27: QuickModeASC list screen (programs selected) ready to
(a. preheating for
manual selection, b. standby temperature set)
3. Select
Settings/Service
.
4. Enter the password "
.
5. Enter parameter
or scroll through the parameter list.
To Next Page
Loading...
