ELTEX MES53xx User Manual

MES53xx, MES33xx, MES23xx Ethernet Switch Series 172
Command line prompt is as follows:
console(config-dhcp)#
Table 5.198. Configuration mode commands
Command
Value/Default value
Action
default-router ip_address_list
The list of routers is not
defined by default.
Define the default list of routers for a DHCP client.
- ip_address_list - list of IP addresses of the routers; can
contain up to 8 space-delimited entries.
The IP address of the router and the client must be
in the same subnetwork.
no default-router
Set the default value.
dns-server ip_address_list
The list of DNS servers is
not defined by default.
Define the list of DNS servers available to DHCP clients.
- ip_address_list - list of IP addresses of DNS server; can
contain up to 8 space-delimited entries.
no dns-server
Set the default value.
domain-name domain
domain: (1..32) characters
Define the domain name for DHCP clients.
no domain-name
Set the default value.
netbios-name-server
ip_address_list
The list of WINS servers is
not defined by default.
Define the list of WINS servers available to DHCP clients.
- ip_address_list - list of IP addresses of WINS server; can
contain up to 8 space-delimited entries.
no netbios-name-server
Set the default value.
netbios-node-type {b-node |
-node | h-node}
The type of the NetBIOS
node is not defined by
default.
Define the type of the NetBIOS Microsoft node for DHCP
clients:
- b-node - broadcast node;
- p-node - point-to-point;
- m-node - mixed node;
- h-node - hybrid node.
no netbios-node-type
Set the default value.
next-server ip_address
-
The command is used to inform DHCP client about the
address of the server (TFTP as a rule) with the boot file.
no next-server
Set the default value.
next-server-name name
name: (1..64) characters
The command is used to inform DHCP client about the name
of the server with the boot file.
no next-server-name
Set the default value.
bootfile filename
filename: (1..128)
characters
Specify the name of the file which is used for boot load of
the DHCP client.
no bootfile
Set the default value.
time-server ip_address_list
The list of servers is not
defined by default.
Define the list of time servers available to DHCP clients.
- ip_address_list - list of IP addresses of time servers; can
contain up to 8 space-delimited entries.
no time-server
Set the default value.
option code {boolean
bool_val | integer int_val |
ascii ascii_string | ip[-list]
ip_address_list | hex
{hex_string | none}}
[description desc]
code: (0..255);
bool_val: (true, false);
int_val: (0..4294967295);
ascii_string: (1..160)
characters;
desc: (1..160) characters.
Configures DHCP server options.
- code - the code of a DHCP server option;
-bool_val – boolean value;
- integer – an integer;
- ascii_string - an ASCII string;
- ip_address_list - the list of IP addresses;
- hex_string - a hex string;
no option code
Remove DHCP server options.
Privileged EXEC mode commands
Command line prompt in the Privileged EXEC mode is as follows:
console#

ELTEX MES53xx Specifications

General

Brand	ELTEX
Model	MES53xx
Category	Switch
Language	English