ELTEX MES53xx User Manual

MES53xx, MES33xx, MES23xx Ethernet Switch Series 34
>lcli
Console baud-rate auto detection is enabled, press Enter twice to complete
the detection process
User Name:
Detected speed: 115200
User Name:admin
Password:***** (admin)
console#
To quickly get help for available commands, use key combination SHIFT+?.
4.3 Startup menu
To enter the startup menu, connect to the device via the RS-232 interface, reboot the device and
press and hold the ESC or ENTER key for 2 seconds after the POST procedure is completed.
U-Boot 2011.12 (Feb 01 2016 - 14:45:42) Eltex version: v2011.12 2013_Q3.0 4.0.1
Loading system/images/active-image ...
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Startup menu view:
Startup Menu
[1] Restore Factory Defaults
[2] Password Recovery Procedure
[3] Back
Enter your choice or press 'ESC' to exit:
Table 4.1. Startup menu interface functions
Function
Description
Restore Factory Defaults
Restore factory default configuration
Password Recovery Procedure
Reset authentication settings
Back
Resume startup
4.4 Switch operation modes
MES53xx, MES33xx ,MES23xx operate in the stacking mode.
4.4.1 Switch operation in stacking mode
Switch stack works as a single device and can include up to 8 devices with the following roles
defined by their sequential number (UID):
 Master (device UID 1 or 2) manages all stack units.

ELTEX MES53xx Specifications

General

Brand	ELTEX
Model	MES53xx
Category	Switch
Language	English