ELTEX MES53xx User Manual

MES53xx, MES33xx, MES23xx Ethernet Switch Series 44
console>
Table 5.8. EXEC mode commands
Command
Value/Default value
Action
macro apply word
word: (1..32) characters
Apply the selected macro.
macro trace word
Validate the selected macro.
show parser macro [{brief |
description [interface
{gigabitethernet gi_port |
tengigabitethernet te_port |
fortygigabitethernet fo_port |
port-channel group}] | name
word}]
gi_port: (1..8/0/1..48);
te_port: (1..8/0/1..24);
fo_port: (1..8/0/1..4);
group: (1..16);
word: (1..32) characters
Show parameters of the macros configured on the device.
Interface configuration mode commands
Command line prompt in the interface configuration mode is as follows:
console(config-if)#
Table 5.9. Interface configuration mode commands
Command
Value/Default value
Action
macro apply word
word: (1..32) characters.
Apply the selected macro.
macro trace word
word: (1..32) characters.
Validate the selected macro.
macro descriptionword
word: (1..160) characters.
Specify the macro descriptor string.
no macro description
Delete the descriptor string.
5.4 System management commands
EXEC mode commands
Command line prompt in the EXEC mode is as follows:
console>
Table 5.10. System management commands in EXEC mode
Command
Value/Default value
Action
ping [ip] {A.B.C.D | host} [size
size] [count count] [timeout
timeout] [source A.B.C.D]
host: (1..158) characters;
size: (64..1518)/64 bytes;
count: (0..65535)/4;
timeout: (50..65535)/2000
ms.
This command is used to transmit ICMP requests (ICMP Echo-
Request) to a specific network node and to manage replies
(ICMP Echo-Reply).
- A.B.C.D - network node IPv4 address;
- host - domain name of the network node;
- size - size of the packet to be sent, the quantity of bytes in the
packet;
- count - quantity of packets to be sent;
- timeout - request timeout.
ping ipv6 {A.B.C.D.E.F | host}
[size size] [count count]
[timeout timeout] [source
A.B.C.D.E.F]
host: (1..158) characters;
size: (68..1518)/68 bytes;
count: (0..65535)/4;
timeout: (50..65535)/2000
ms.
This command is used to transmit ICMP requests (ICMP Echo-
Request) to a specific network node and to manage replies
(ICMP Echo-Reply).
- A.B.C.D.E.F - IPv6 address of the network node;
- host - domain name of the network node;
- size - size of the packet to be sent, the quantity of bytes in the
packet;
- count - quantity of packets to be sent;
- timeout - request timeout.

ELTEX MES53xx Specifications

General

Brand	ELTEX
Model	MES53xx
Category	Switch
Language	English