ELTEX SBC-1000 - Page 110

110 SBC session border controllers
ports start
START_PORT
1024-65535
Set the start port for RTP
ports range
RANGE_PORT
1-65535
Set number of ports for RTP
ports show
View configuration of ports for RTP
quit
Terminate this CLI session
radius
Enter the RADIUS configuration mode
reserve
Enter the reserve management mode
route
Enter the static route configuration
mode
rule set
Enter the rule set configuration mode
switch
Enter the switch configuration mode
(only for SBC-2000 and SBC-3000)
show running main
by_step
Show the current main configuration in
steps
show running main
whole
Show the current main configuration in
full
show running
network
Show current network configuration
show running
radius_servers
Show the current RADIUS server
configuration
show running snmp
Show current SNMP configuration
show startup main
by_step
Show the initial main configuration in
steps
show startup main
whole
Show the initial main configuration in
full
show startup
network
Show initial network configuration
show startup
radius_servers
Show the initial RADIUS server
configuration
sip destination
Enter the SIP destination configuration
mode
sip transport
Enter the SIP transport configuration
mode
sip users
Enter the SIP users configuration mode
snmp
Enter the SNMP configuration mode
switch
Enter the internal switch configuration
mode
syslog
Enter the syslog parameter
configuration mode
top
Return to level back.
trunk
Enter the trunk configuration mode
user agent
Enter the mode of editing the list of
banned client applications
4.2.7.2 Configuration mode of automatic firmware and configuration updates
To switch to the configuration mode, you need to execute the autoupdate command.
SBC-[CONFIG]> autoupdate
Entering auto-update mode.
SBC-[CONFIG]-[AUTO-UPDATE]>
Command
Parameter
Value
Action
?
Show the list of available commands.
exit
Return from this configuration submenu to the upper
level.
quit
Terminate this CLI session
set auth-name
AUTH_NAME
String, 63
characters max.
Set authentication name
set auth-pass
AUTH_PASS
String, 63
characters max.
Set authentication password
set
authentication
AUTH
on/off
Enable authentication on autoupdate server
set config-
name
CFG_NAME
String, 63
characters max.
Set configuration file name. The name must be in «.
cfg» format