ELTEX SBC-1000 - Page 111

SBC session border controllers 111
set enable
EN
on/off
Enable autoupdate
set manifest-
name
MANIFEST_NAME
String, 63
characters max.
Set firmware versions file. The name must be in
«.manifest» format
set protocol
PROTO
tftp
ftp
http
https
Specify the protocol to be used for the update
set source
NET_IFACE_IDX
static
0-39
Set the interface from which the server address (DHCP
option 66) and the names of configuration files and
firmware versions (DHCP option 57)
If you set static, the server information and file names
will be taken from the SBC configuration
set static-
server
ST_SERVER
String, 63
characters max.
Set the address of the auto update server
set update-
config
UCONF
on/off
Enable configuration autoupdate
set update-
firmware
UFIRM
on/off
Enable firmware autoupdate
set updating-
period config
UPD_CONFIG
1-263520
Set the period for configuration update, in minutes
set updating-
period
manifest
UPD_MANIFEST
1-263520
Set the period for firmware update, in minutes
show auto-
update-config
Show autoupdate configuration
show net-
interfaces
Show the list of network interfaces with DHCP enabled
4.2.7.3 DoS protection configuration mode
To enter this mode, execute dos-protection command in the configuration mode.
SBC2000-[CONFIG]> dos-protection
Entering dos-protection mode.
SBC2000-[CONFIG]-[DOS-PROTECTION]>
Command
Parameter
Value
Action
?
Show the list of available commands.
exit
Return from this configuration submenu to the upper
level.
quit
Terminate this CLI session
set enable
ICMP_flood
ENABLE
true/false
Activate ICMP flood protection
set enable
PortScan
ENABLE
true/false
Activate port scanning protection
set enable
protection
ENABLE
true/false
The option manages the global enabling of DoS
protection functions
set enable
RTP_flood
ENABLE
true/false
Activate RTP flood protection
set enable
SIP_flood
ENABLE
true/false
Activate SIP flood protection
set enable
User_Agent_fil
ter
ENABLE
true/false
Activate filtering by User-Agent
set SIP_flood
block time
BLOCKTIME
600-3600
Set the time of short subscriber blocking, seconds
set SIP_flood
blocks
BLOCKS
1-10
Set the number of hits to the short block before hitting
the long block
set SIP_flood
forget_time
FORGETTIME
12-48
Set the long blocking time and the forget time of the
subscriber caught in the short blocking, hours
set SIP_flood
HITS
1-32
Set the number of violations before hitting a short
block
show
Show DoS protection settings