ELTEX SBC-1000 - Page 119

SBC session border controllers 119
4.2.7.6 Configuration and operation with the PING utility
To enter this mode, execute hostping command in the configuration mode.
SBC1000-[CONFIG]> hostping
Entering hostping mode.
SBC1000-[CONFIG]-[HOSTPING]>
Command
Parameter
Value
Action
?
Show the list of available commands.
exit
Return from this configuration submenu to the
upper level.
host add
ADDR
AAA.BBB.CCC.DDD
Add a host to the ping list
host remove
ADDR
AAA.BBB.CCC.DDD
Remove a host from the ping list
host show
Show operation result
set onboot
ONBOOT
yes/no
Start onboot check
set period
PINGTIME
1-255
Ping period, minutes
set tries
TRIES
1-7
Number of requests to each host
show
Display the PING utility settings
start
Run a periodic ping
stop
Stop a periodic ping
quit
Terminate this CLI session
4.2.7.7 Network parameters configuration mode
To enter this mode, execute network command in the configuration mode.
SBC-[CONFIG]> network
Entering Network mode.
SBC-[CONFIG]-NETWORK>
Command
Parameter
Value
Action
?
Show the list of available commands.
add interface
pptpVPNclient
<LABEL>
<IPADDR>
<USER>
<PASS>
you may use letters,
numbers, '_', '.', '-',
':' characters, 255
characters max.
IP address in
AAA.BBB.CCC.DDD format
you may use letters,
numbers, '_', '.', '-'
characters, 63
characters max.
you may use letters,
numbers, '_', '.', '-'
characters, 63
characters max.
Add new VPN/PPTP client
LABEL — interface name;
IPADDR — PPTP server IP address;
USER — user name;
PASS — password
add interface
tagged
dynamic/static
<LABEL>
<VID>
<IPADDR>
<NETMASK>
you may use letters,
numbers, '_', '.', '-',
':' characters, 255
characters max.
1-4095
IP address in
AAA.BBB.CCC.DDD format
network mask in format
of AAA.BBB.CCC.DDD
Add a new network interface
LABEL — interface name;
VID — VLAN ID;
IPADDR — PPTP server IP address;
NETMASK — network mask