ELTEX SBC-1000 - Page 134

134 SBC session border controllers
set rtp-loss
multiplier
silence-
suppression
TIMEOUT_MULTIPLIER
1-30
Set the RTP waiting multiplier in the on
silence suppression mode.
set rule set id
RULE_SET_ID
1-65535
Assign rule set
set rule set
none
Remove rule set
set session-
expires
SESSION_EXPIRES_OR_OFF
90-64800/off
Requested period of session control
according to RFC4028, seconds.
off — disables session control.
set sip domain
SIP_DOMAIN
String, 63
characters max.
Set the SIP domain with which to
register
set sip header
format
SIP_HEADER_FORMAT
full/compact
Set SIP header format.
full — full format;
compact — compact format.
set sip
transport
SIP_TRANSPORT_ID
1-65535
Assign SIP transport
set transport
protocol
SIP_TRANSPORT
UDP-only/
UDP-prefer/
TCP-prefer/
TCP-only
Assign transport protocol
UDP-only — UDP only;
UDP-prefer — UDP/TCP with UDP
priority;
TCP-prefer — UDP/TCP with TCP
priority;
TCP-only — TCP only.
set verify media
remote address
ON_OFF
on/off
Enable the RTP source IP and port
control option
show info
Show settings
show radius
profile list
Show list of all configured RADIUS
profiles
show rule set
list
Show list of configured rule set
show sip
transport list
Show list of available SIP transports
4.2.7.22 SNMP configuration mode
To enter this mode, you must execute the snmp command in the general configuration mode or in the
network configuration mode.
SBC-[CONFIG]> snmp
Entering SNMP mode.
SBC-[CONFIG]-[NETWORK]-SNMP>
SBC-[CONFIG]-NETWORK> snmp
Entering SNMP mode.
SBC-[CONFIG]-[NETWORK]-SNMP> exit
Command
Parameter
Value
Action
?
Show the list of available commands.
add
<TYPE>
trapsink/
trap2sink/
informsink
Add SNMP trap transmission rule:
TYPE — SNMP message type
IP — trap receiver IP address;
COMM — password contained in traps;
PORT — trap receiver UDP port
<IP>
IP address in
AAA.BBB.CCC.DDD
format
<COMM>
string of up to 31
characters
<PORT>
1-65535
config
Return to Configuration menu.
create user
<LOGIN>
string of up to 31
characters
Create a user (assign a login and password for
access)