ELTEX SBC-1000 - Page 144

144 SBC session border controllers
set by id
destination
secondary
SBC_TRUNK_ID
SBC_SIP_DESTINATI
ON_ID
1-65535
1-65535
Assign redundant destination to trunk by ID
set by id load
balance mode
SBC_TRUNK_ID
LOAD_BALANCE_MODE
1-65535
active-active/
active-backup
Assign balancing mode by trunk ID
set by id load
balance timeout
SBC_TRUNK_ID
LOAD_BALANCE_TIME
OUT
1-65535
5-65535
Assign balancing timeout by trunk ID, sec
set by id name
SBC_TRUNK_ID
SBC_TRUNK_NAME
1-65535
String, 63
characters max.
Assign name to trunk by its ID
set destination
primary
SBC_TRUNK_INDEX
SBC_SIP_DESTINATI
ON_ID
0-65534
1-65535
Assign main destination to trunk by index
set destination
secondary
SBC_TRUNK_INDEX
SBC_SIP_DESTINATI
ON_ID
0-65534
1-65535
Assign redundant destination to trunk by index
set load
balance mode
SBC_TRUNK_INDEX
LOAD_BALANCE_MODE
0-65534
active-active/
active-backup
Assign balancing mode by trunk index
set load
balance timeout
SBC_TRUNK_INDEX
LOAD_BALANCE_TIME
OUT
0-65534
5-65535
Assign balancing timeout by trunk index, sec
set name
SBC_TRUNK_INDEX
SBC_TRUNK_NAME
0-65534
String, 63
characters max.
Assign name to trunk by its index
show info
Show settings
show sip
destination
list
Show list of available SIP destination
swap by id
destination
SIP_TRUNK_ID
1-65535
Swap main and redundant destination in the
specified trunk
swap
destination
SIP_TRUNK_INDEX
0-65534
Swap main and redundant destination in the
specified trunk
4.2.7.26 Configuring the list of restricted client applications
To enter this mode, execute 'user agent' command in the configuration mode.
SBC1000-[CONFIG]> user agent
Entering SBC user agent mode.
SBC1000-[CONFIG]-USER-AGENT>
Command
Parameter
Value
Action
?
Show the list of available commands.
add
USER_AGENT
scan/
crack/
flood/
kill/
sipcli/
sipvicious/
sipsak/
sundayddr/
iWar/
SIVuS/
Gulp/
sipv/
smap/
Add one of the preset User-Agents to the block list