152 SBC session border controllers
Parameters
<interface> — interface type:
cpu-port;
front-port — external uplink interfaces;
host-channel;
host-port;
port-channel — LAG uplink interface aggregation groups;
sm-port.
<range> — number of the port/ports with which traffic exchange is allowed:
for cpu-port: <1/0>, where:
for front-port: <unit/port>, where:
unit — module number, may take value [1],
port — port number, may take values: [0 .. 3];
for host-channel: [1];
for host-port:
unit — module number, may take value [1],
port — port number, may take values: [0 .. 2];
for port-channel: [0 .. 4].
for sm-port:
unit — module number, may take value [1],
port — port number, may take values: [0 .. 5].
Example
SBC2000-[CONFIG]-[SWITCH]> show interfaces counters front-port all
MAC MIB counters receive
~~~~~~~~~~~~~~~~~~~~~~~~
Port UC recv MC recv BC recv Octets recv
---------------------------------------------------------------------------------
front-port 1/0 0 0 0 0
front-port 1/1 436940 6297 9289 65685375
front-port 1/2 1422764 6077 41999 210652881
front-port 1/3 0 0 0 0
MAC MIB counters sent
~~~~~~~~~~~~~~~~~~~~~
Port UC sent MC sent BC sent Octets sent
---------------------------------------------------------------------------------
front-port 1/0 0 0 0 0
front-port 1/1 455819 6087 42006 96955149
front-port 1/2 148842 6280 9296 17450454
front-port 1/3 0 0 0 0
To Next Page
Loading...