BioProTT
TM
Flow Measurement System Version 1.00 page 5 of 75
Read these Operating Instructions carefully before starting up the
device!
Although the BioProTT
TM
flow measurement system represents state-of-the-art
technology, the user may be put at risk if the device is operated incorrectly. You should
therefore carefully read the Operating Instructions before use.
These instructions contain important information on the safe handling of the BioProTT
TM
flow measurement system and accessories. Read these Operating Instructions carefully
before using the device and accessories, and keep them in an easily accessible location.
Familiarize yourself with and observe all warning and safety information.
It is the responsibility of the operator of the device to ensure it is used, inspected and
maintained in accordance with the Operating Instructions. Subsequent revisions or
instructions from the manufacturer must also be taken into account in this regard.
The manufacturer reserves the right to modify technical data without prior notice. Your
local distributor will supply you with current information and updates to these Operating
Instructions.
Please note:
When BioProTT
TM
is used in this manual, it usually refers to the complete flow
measurement system consisting of flow meter and Clamp-On Transducer.
There are 3 versions of the flow meter:
o BioProTT™ FlowTrack: flow meter without display in standard industry
housing.
o BioProTT™ FlowTrack DINrail: flow meter without display for DIN rail
mounting.
Please note: this flow meter is not available yet
o BioProTT™ FlowTrack plus: flow meter with display and enhanced
functionality in standard industry housing
The differences of the flow meters (including SW features) will be pointed out in
the appropriate chapters.
This manual covers the following software versions of the BioProTT
TM
flow meter:
o FT_GFX_EV2200
The software version can be retrieved using the display or the digital
interface.
To Next Page
Loading...