EM TEST compact NX5 Series User Manual

EM TEST Compact NX5
Operating Manual V 1.06 140 / 143
16.1.3.
CE-Conformity V4780
Manufacturer :
EM TEST (Switzerland) GmbH
Address:
Sternenhofstr. 15
CH 4153 Reinach BL1
Switzerland
declares, that under is sole responsibility, the product’s listed below, including all their options, are conformity with the
applicable CE directives listed below using the relevant section of the following EC standards and other normative
documents.
Product‘s name:
Tapped transformer
Model Number(s)
V 4780S1
Low Voltage Directive 2014/35/EU
Standard to which conformity is declared:
EN 61010-1:2011
Safety requirements for electrical equipment for measurement, control, and
laboratory use.
EMC Directive 2014/30/EU
Standard(s) to which conformity is declared:
EN 61326-1:2013
Electrical equipment for measurement, control and laboratory use
(Requirements for devices to use in industrial area.)
EN 61000-3-2:2014
Limits for harmonic current emissions
EN 61000-3-3:2013
Limitation of voltage changes, voltage fluctuations and flicker in public low-
voltage supply systems.
European representative
Manufacturer
AMETEK CTS Germany GmbH
EM TEST (Switzerland) GmbH
Lünenerstr. 211
Sternenhofstr. 15
D 59174 Kamen
CH 4153 Reinach
Tel: +49 (0) 2307 / 26070-0
Tel: +41 61-7179191
Fax: +49 (0)2307 / 17050
Fax: +41 61-7179199
By
A. Gerstner
General manager
A. Burger
Design and Research
Place
Kamen, Germany
Reinach BL, Switzerland
Date
20. December 2016
25. February 2016

EM TEST compact NX5 Series Specifications

General

Brand	EM TEST
Model	compact NX5 Series
Category	Laboratory Equipment
Language	English