EM TEST compact NX5 Series User Manual

EM TEST Compact NX5
Operating Manual V 1.06 25 / 143
3.6.
Software Update
For update the NX generator with a new software it is necessary to copy the new software to an empty USB
memory stick.
The following software updates, backup and restore procedures are described in this chapter.
A 3.6.1 Software update new version
B 3.6.2 SysOS update
This update overwrites the settings to the factory setting. A previous Backup with Export Settings is
strongly recommended
C 3.6.3 Export actual settings
D 3.6.4 Import settings
F 3.6.5 Firmware update
3.6.1.
Software Update new Version
Software Update procedure
1. Select MENU / INFORMATION
Software Update procedure
2. Press Update Software
Note: The button Update SysOS is
only displayed when a new SysOS
is recognized.
A message appears to insert an USB
memory stick with a valid update package
to the front or back side USB Port.
The update file will be automatically
detected
SW filename: com.cts.appsw.apk

EM TEST compact NX5 Series Specifications

General

Brand	EM TEST
Model	compact NX5 Series
Category	Laboratory Equipment
Language	English