EM TEST compact NX5 Series User Manual

EM TEST Compact NX5
Operating Manual V 1.06 69 / 143
6.
Technical data
6.1.
EFT Electrical Fast Transients Burst as per IEC 61000-4-4
Test Level
Model N5
Open circuit *
200 V – 5500 V ± 10% Step 1 V
Wave shape into a 50 load
100 V – 2750 V
Rise time tr
5 ns ± 30%
Pulse duration td
50 ns 30%
Wave shape into a 1000 load
200 V – 5500 V
Rise time tr
5 ns ± 30%
Pulse duration td
35 ns – 150 ns
Source impedance
Zq = 50  ± 20%
Polarity
Positive / negative
Trigger
Trigger of bursts
AUTO, MANUAL, EXTERN
Synchronization
0 - 360° (16 – 500 Hz)
Asynchronous = 0° a reference signal is connected to the Sync input.
Burst duration td
0.10 ms – 999 ms
Burst repetition rate tr
10 ms – 9999 ms
Spike frequency f
1Hz – 1000 kHz Range Step
< 10 kHz 1 Hz
10 – 1000 kHz 1.0 kHz
Test duration T
1 s – 9999 s
1 min - 167 min
Output
Direct via 50  coaxial connector
To connect ext. coupling devices
Coupling network
To L, N, PE all combinations
EUT power mains supply
AC 300 V / 16 A / 50/60 Hz
DC 300 V / 160 A
Test routines
Quick Start
Immediate start, all parameters adjustable during a running test
Standard test as per
IEC 61000-4-4 level 1-4 to power lines
separated to (AC / DC)
IEC 61000-4-4 level 1-4 to signal lines
EN 61000-6-1 Generic to power lines
EN 61000-6-1 Generic to signal lines
EN 61000-6-2 Generic to power lines
EN 61000-6-2 Generic to signal lines
IEC 61000- 4-4 Manual operated standard test routine
Extended Tests
Voltage iteration stepwise: Voltage level V after n pulses by V
Frequency sweep in one single burst
Frequency sweep with constant pulse numbers
Frequency sweep, constant burst duration
Synchronized with phase angle
Random burst release
* With Burst pulses as per. IEC 61000-4-4 Ed 3: 2012 the max. output voltage with external CDN can be limited.

EM TEST compact NX5 Series Specifications

General

Brand	EM TEST
Model	compact NX5 Series
Category	Laboratory Equipment
Language	English