EM TEST compact NX5 Series User Manual

EM TEST Compact NX5
Operating Manual V 1.06 71 / 143
6.3.
Pulsed magnetic Field as per IEC 61000-4-9
Test Level
Model NX5
Generator charging voltage
160 V – 5000 V ± 10% Step 1 V
Short circuit current
80 A – 2500 A ± 10%
Approx. 80 A/m to 2500 A/m
Wave shape
Rise time tr
8 s ± 20%
Pulse duration
20 s ± 20%
Polarity
Pos., Neg., Alt
Repetition rate
max. 1 Hz (1 s* - 999 s)
Events preselection
1 - 99'999
Counter
1 – 1’000’000
Trigger
Trigger of pulses
AUTO, MAN, EXTERN
Synchronization
0 - 360° (16 – 500 Hz)
Asynchronous = 0° a reference signal is connected to the Sync input.
Resolution
1°
1°
Measurements
CRO
5 V Trigger
CRO V
10 Vp at 5 kV
CRO I
10 Vp at 2.5 kA
Accuracy CRO V CRO I
± 10%
CRO V/I Z measuring instrument
> 1 MΩ
Peak voltmeter
5000 V
Peak current meter
2500 A: Display  1 Digit  20 A
Current limiter setting
10 A...3000 A step 10 A
Output
no
9 F
18 F
Direct HV-COM
HV-Banana connector, Zi = 2
x
x
Coupling network
L – N with Z = 2
x
L-PE, N-PE, L+N-PE with Z = 12
x
DUT supply
AC 300 V / 16 A / 50/60 Hz
DC 300 V / 16 A
Test Routines
Quick Start
Immediate start, all parameters adjustable during a running test
Standard test routines
IEC 61000-4-5 one level: Selectable level 1 to 4
separated to (AC / DC)
IEC 61000-4-5 all levels: Starts from lowest level to selected level
IEC 61000-4-5 level 3
IEC 61000-4-5 level 4
EN 61000-6-1 Generic (AC / DC)
EN 61000-6-2 Generic
Extended Tests
Voltage iteration stepwise: Voltage level V after n pulses by V
Angle iteration stepwise: Change phase angle A after n pulses by A
Angle random iteration: Random phase angle A after n pulses
Magnetic field test
test routine as per IEC 61000-4-9
test level 100, 300 and 1000 A/m
cont. adjustable within Quick Start
* depends on charging voltage

EM TEST compact NX5 Series Specifications

General

Brand	EM TEST
Model	compact NX5 Series
Category	Laboratory Equipment
Language	English