Set Date: Year; Month and Day from calendar
For set tap to the Year, Month (date)
Date format: dd.mm.yyy; dd-mm-yyyy, dd/mm/yyyy, yyyy-mm-dd
Set time: Hour; minute
Time format: hh:mm:ss (24 h), hh:mm:ss (12 h)
Synchronization: Phase angle sync form EUT line or from an
external sync signal.
Internal: 1-phase: Phase L to N
3-phases: Phase L1 to N
External: Sync input rear: Low – High max. 690 V
Sync signal timeout: Waiting time to sync timeout
Disable: Default setting, no timeout
Enable: activate and set time [s]
External trigger timeout: Waiting time to external trigger timeout
Disable: Default setting, no timeout
Enable: activate and set time [s]
Power Frequency detection:
Disable: No filter for Power Fail standard
Enable: Standard library is filtered to 50 Hz / 60 Hz