EM TEST CWS 500D - Service; Addresses

EM Test CWS500 D
User manual V 1.07 14 / 34
4.4. Service
All service functions are indicated in the display.
Page 2 (Overview service)
SERVICE
F1 : Addresses
F3 : Setup
F4 : Amplifier Switch
F5 : Function check powermeter
F6 : Function check amplifier switch
F1 F2 F3 F4 F5 F6 F7
F1 Addresses
The addresses of EM TEST AG Switzerland and EM Test GmbH Germany will be displayed.
A list of the world-wide sales partners is awailable on the internet under www.emtest.com.
F3 Setup
The software will clearly explain the setup procedure.
F4 Amplifier Switch
Set the amplifier to internal / external.
Default setting after power on or go to local setting : internal
F5 Function check Powermeter
Function check routine for the built in powermeter (PM). With this check function the correct working of the PM
can be verified.
F6 Function check amplifier switch
Check function for verification of the correct working of the built in amplifier switch, and the built in Amplifier
( gain >50dB ).
4.4.1. Addresses
The addresses of the EM TEST AG and the
EM TEST GmbH are shown. The addresses of all EM
TEST sales agencies are listed on the web site of EM
Test under :
www.emtest.com
Page 3 (Addresses)
EM TEST AG Switzerland
Sternenhofstr. 15
CH – 4153 Reinach BL1
Tel : +041 61 717 91 91
Fax : +041 61 717 91 99
email : info@emtest.ch
For further sales offices
CH D refer to www.emtest.com
F1 F2 F3 F4 F5 F6 F7