HIGH PERFORMANCE
MARITIME
PRODUCTS
em-trak A100
Features and specification
www.em-trak.com
High Performance Maritime Products
• High performance
• Reliable
• Rugged
• Small
• Easy to use
• Easy to install
• Transmit off function
• Radar type display
• Certified for inland & deep sea
The em-trak A100 is an aid to navigation and must not be relied upon to provide
accurate navigation information. AIS is not a replacement for vigilant human lookouts
and other navigation aids such as Radar. The performance of the A100 may be
seriously impaired if not installed as instructed in the user manual, or due to other
factors such as weather and or nearby transmitting devices. Compatibility with other
systems may vary and is reliant on the third party systems recognising the standard
outputs from the A100. em-trak reserves the right to update and change these
specifications at any time and without notice.
Head Office:
Forum 3, Parkway,
Solent Business Park,
Whiteley, Fareham,
Southampton PO15 7FH
United Kingdom
T +44 (0)1489 611662
F +44 (0)1489 611612
Regional Office:
470 Atlantic Avenue,
4th floor,
Boston,
02210 United States
F +1 617 273 8001
Power
• 12 to 24V DC
• Power consumption 10W
GPS Receiver (AIS Internal)
• IEC 61108-1 compliant
Data Interfaces
• RS232 38.4k baud bi-directional
(PC connection)
• IEC61162-2 bi-directional interfaces x 3
• IEC61162-1/2 sensor inputs x 3
• DGPS correction data input
(ITU-R M.823-2)
• NMEA0183 compliant
Product Order Information
• Product Name: em-trak A100 AIS
Class A transceiver
• Product Code: 405-0025
VHF Transceiver
• Transmitter x 1
• Receiver x 3
• Frequency: 156.025 to 162.025 MHz
in 25KHz steps
• Output power 12.5W (1W setting available).
• Channel bandwidth: 25KHz
• Channel step: 25KHz
• Modulation modes
• 25KHz GMSK (AIS, TX and RX)
• 25KHz AFSK (DSC, RX only)
• Bit rate - 9600 b/s (GMSK) and
1200 b/s (FSK)
• Rx Sensitivity -109dBM @ 20% PER
• Co-channel rejection 10dB
• Adjacent channel selectivity 70dB
• Spurious response rejection 70dB
Designed to meet
the following standards:
• IEC61993-2
IEC standard, Class A shipborne equipment
• IEC60945 Edn 4.0 ‘Protected’ category
IEC standard, environmental requirements
• ITU-RM.1371-3
Universal AIS Technical Characteristics
• IEC61162-1/2 Edn. 2.0
IEC standards, digital interfaces
• IEC61108-1
IEC standard, GPS receiver equipment
Techncal Support
For technical support please visit support.em-trak.com or email support@em-trak.com
•
201-0118:2
To Previous Page
Loading...
