EMC Celerra

nas_connecthome
143
The nas Commands
[-ftp_priority { Disabled|1 |2 |3 }]
Enables FTP as a Primary, Secondary, or Tertiary transport
mechanism. Specifying Disabled removes FTP as a transport
mechanism.
[-ftp_ipport <ip_addr>[:<port>]]
Sets or modifies the IP address of the primary FTP server and
corresponding port.
Note: Specifying "" (empty double quotes) disables the use of the existing
IP address for this transport mechanism.
[-ftp_user <username>]
Sets or modifies the user name of the login account on the
primary FTP server.
Note: Specifying "" (empty double quotes) reverts to the default value of
onalert.
[-ftp_passwd [<passwd>]]
Sets or modifies the password of the login account on the primary
FTP server.
Note: Specifying "" (empty double quotes) reverts to the default value of
EMCCONNECT.
[-ftp_folder <path>]
Sets or modifies the path to the folder on the primary FTP server
where the event files have to be deposited.
Note: Specifying "" (empty double quotes) reverts to the default value of
incoming.
[-ftp_mode { active |passive }]
Sets or modifies the transfer mode of the primary FTP transport
mechanism.
Note: Specifying "" (empty double quotes) reverts to the default value of
active.
[-ftp_ipport_2 <ip_addr>[:<port>]]
Sets or modifies the IP address of the secondary FTP server and
corresponding port.