EMC Celerra

178
Celerra Network Server Command Reference Manual
The nas Commands
rw_servers=
ro_servers=
rw_vdms =
ro_vdms =
auto_ext = no,virtual_provision=no
stor_devs = APM00042000818-0012,APM00042000818-0014
disks = d7,d9
See Example #1 for a description of command output.
EXAMPLE #3 To create a uxfs file system named ufs1 on storage system
APM00042000818, with a size of 100 GB, using the
clar_r5_performance pool and allowing the file system to share disk
volumes with other file systems, type:
$ nas_fs -name ufs1 -type uxfs -create size=100G pool=clar_r5_performance
storage=APM00042000818 -option slice=y
id = 38
name = ufs1
acl = 0
in_use = False
type = uxfs
worm = off
volume = v171
pool = clar_r5_performance
member_of = root_avm_fs_group_3
rw_servers=
ro_servers=
rw_vdms =
ro_vdms =
auto_ext = no,virtual_provision=no
stor_devs = APM00042000818-001F,APM00042000818-001D,APM00042000818-0019,APM00042
000818-0016
disks = d20,d18,d14,d11
Where:
See Example #1 for a description of command output. The
clar_r5_performance storage pool is available with the CLARiiON
backend.
EXAMPLE #4 To create a rawfs file system named ufs3 with the same size as the file
system ufs1 using the clar_r5_performance pool and allowing the file
system to share disk volumes with other file systems, type:
$ nas_fs -name ufs3 -type rawfs -create samesize=ufs1 pool=clar_r5_performance
storage=APM00042000818 -option slice=y
id = 39
Value Definition
member_of file system group to which the file system belongs.