EMC Celerra

nas_fs
185
The nas Commands
EXAMPLE #13 To start the conversion of the file system, ufs2, and to conform to the
MIXED access policy mode, type:
$ nas_fs -translate ufs2 -access_policy start -to MIXED -from NT
id = 38
name = ufs2
acl = 1432, owner=nasadmin, ID=201
in_use = True
type = uxfs
worm = off
volume = v171
pool = clar_r5_performance
member_of = root_avm_fs_group_3
rw_servers= server_2
ro_servers=
rw_vdms =
ro_vdms =
auto_ext = no,virtual_provision=no
stor_devs = APM00042000818-001F,APM00042000818-001D,APM00042000818-0019,APM00042
000818-0016,APM00042000818-001C
disks = d20,d18,d14,d11,d17
disk=d20 stor_dev=APM00042000818-001F addr=c0t1l15 server=server_2
disk=d20 stor_dev=APM00042000818-001F addr=c32t1l15 server=server_2
disk=d18 stor_dev=APM00042000818-001D addr=c0t1l13 server=server_2
disk=d18 stor_dev=APM00042000818-001D addr=c32t1l13 server=server_2
disk=d14 stor_dev=APM00042000818-0019 addr=c0t1l9 server=server_2
disk=d14 stor_dev=APM00042000818-0019 addr=c32t1l9 server=server_2
disk=d11 stor_dev=APM00042000818-0016 addr=c0t1l6 server=server_2
disk=d11 stor_dev=APM00042000818-0016 addr=c32t1l6 server=server_2
disk=d17 stor_dev=APM00042000818-001C addr=c0t1l12 server=server_2
disk=d17 stor_dev=APM00042000818-001C addr=c32t1l12 server=server_2
See Example #1 for a description of command output.The
clar_r5_performance storage pool is available with the CLARiiON
backend.
EXAMPLE #14 To display the status of access policy conversion for ufs2, type:
$ nas_fs -translate ufs2 -access_policy status
1130511626: CFS: 7: conversion in progress : 10/11 inodes done 90 % done
status=In progress
percent_inode_scanned=90
1130511626: ADMIN: 4: Command succeeded: acl database=/ufs2 convertAccessPolicy
status
EXAMPLE #15 To create a nested mount file system, nmfs1, type:
$ nas_fs -name nmfs1 -type nmfs -create
id =
name = nmfs1
acl = 0
in_use = False